Hobart Handler 210 MVP Welder Review in 2021

Rate this post

The Hobart Handler 210MVP allows for great welder portability and convenience through the use of a multi-voltage plug. This option lets you plug the unit into either a 115V or 230V outlet with an easy change of the plug.

Table of Contents

Hobart Handler 210 MVP User Manual

Having problem? Download Hobart Handler 210 MVP instructions.

Download

Pros & Cons of Hobart Handler 210 MVP

Pros

Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe
Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel
Material Thickness: 1/4” – 3/8”
Input Voltage: 110/115/120 V – 220/230/240 V

Cons

The control board may not be of good quality

Video Guide:Hobart Handler 210 MVP Welder Review | My Thoughts After 6 Months

[su_note note_color="#d9d9db" radius="0"]Hobart Handler 130 Wire-Feed MIG-Ready Welder has an EZ-Mode that makes it extra-easy to set up the welder for different material thicknesses by simply adjusting one knob for voltage and wire feed speed control. The welder can also be operated in the traditional way with separate voltage and wire-feed speed knobs for customized…

Wilton 4550R 28821 Review

[su_note note_color="#d9d9db" radius="0"] The Wilton Reversible Bench Vise is all about versatility. This vise features jaws that open an incredible distance, ranging from 10-3/4” to 14-1/2” depending on model. It also includes two anvils, a 360° swivel base and dual lock-downs to ensure maximum stability. The body and movable jaw are 30,000 PSI gray cast…

Hobart Handler 135 Review

[su_note note_color="#d9d9db" radius="0"]The Handler 135 operates off 115-volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 30 - 135 it easily handles a broad selection of solid mild steel or stainless, flux cored, and aluminum wires. [/su_note] Hobart…

Hobart Handler 175 Review

[su_note note_color="#d9d9db" radius="0"]Powerful and portable, the Handler 175 operates off 230 volt power. Comes ready to weld with or without sheilding gas, no additional; kit required. Amperage output range of 30-175. Will weld a broad selection of mild steel or stainless, flux cored, and aluminum wires. [/su_note] Hobart Handler 175 User Manual [su_note note_color="#d9d9db" radius="0"]…